Your solder should always be placed on the opposite side of the pipe where the flame is directed.…
Deluxe Wall Mounted Fan Forced Heaters
The use of an existing well is a possibility but generally not conducive to a proper closed loop installation. The depth of the well and size of casing will be a consideration. Vertical loops are generally drilled by way of a 3' casing to a depth determined by the loop requirement. The well is then filled with a slurry to optimize heat transfer. The number of wells required is calculated as per the heating / cooling load of the home
read details
No, chimney components from different manufacturers cannot be combined. Code dictates that a chimney system must be comprised of components as certified by one manufacturer. Futhermore, most components are designed in such a way as not to fit correctly if matched with another system's components, rendering it not only uncertified but extremely unsafe.
